candy/jpeg

Richard and Mary
Torrens and Family

Walks with the cats Health blog Food for free Natural History Discussion mailing lists
Hints and tips Photographs Genealogy

The whole www site is being moved. Hopefully you will not notice any change, but it will be very helpful if you report any broken links or other things that do not work. Thank you.

Sinclair Radionics - Neoteric 60 amplifier

Neoteric/jpeg

I worked at Sinclair Radionics from October 1964 to April 1975. For most of that time I was in charge of the service department. You can read my recollections of early Sinclair Radionics.

The Sinclair Neoteric 60 was launched at the Audio Fair at the Hotel Russell, London in April 1968. It was sold until about 1973. The technical information I have on it is dated 1971.

There were two separate versions of the Neoteric 60, which was designed by Martin Wilcox (the circuit) and Ian Sinclair (artistic designer) both under the guidance and control of Clive Sinclair himself, whose concept it was. Clive Sinclair, however, had nothing to do with the circuit design, which is why it was a technically advanced and reliable product. However the initial internal design was done by Martin Wilcox himself: this had sub-modules in it, with connecting wires. It was a complete failure being very difficult to manufacture and almost impossible to repair. It also had a steel cover which hummed in the magnetic field of the mains transformer. The page on Planet Sinclair refers to this early design which is best forgotten! I doubt whether any of the Mark I Neoteric 60s still exist The adverse information on the www all seems to refer to this failed Mark 1 version.

So Clive Sinclair had the board re-laid, a job done by Keith Pauley (you can see his KP logo on the circuit board in the photos), so that everything was on one circuit board. This Mark 2 Neoteric is the version described herein. Chassis and cover were both aluminium, so magnetic hum was removed. The Neoteric Mark 2 was not particularly difficult to produce - though there were many reject rosewood fronts, as the wood tended to break in the wrong place! It was also much easier to repair.

The circuit boards and the metalwork were manufactured by Harvey Hall Electronics Ltd. in Thetford, who also assembled the amplifiers.

I have some spare parts for the Neoteric, and can help with repairs and advise, so please contact me.

Page Information

valid-html401-blue Document URI: www.torrens.org/Electronics/Neoteric/index.html
Page first published: Tuesday the 4th of August, 2015
Last modified: Mon, 24 Oct 2016 17:17:25 BST
Written by and © Richard Torrens.